I ordered the Torqeedo on Tuesday, and Claude delivered it on Wednesday. And we installed it and it worked perfectly first time. What a breath of fresh to have things work as they should.<\/p>\n
She was to be slipped at 4pm and so Claude brought the motor here early enough so we could go up the river beforehand and do some more tests.<\/p>\n
This time we had three on board – the third being Phil from Dragon Song, one the inmates here at Monty’s, trapped here by contagious apathy. And this time I remembered to pull the centreboard up to reduce drag even more.<\/p>\n
I added a piece of hardwood to the outboard bracket, which moved the mounting a little to the stern, and we adjusted the angle of the motor to what we thought to be most efficient.<\/p>\n
Going with the tide we hit 7.5 knots, and the best we saw coming back was 5.9.\u00a0 This would suggest a current of 0.8 knots going upstream, and so that makes the still water speed 6.7 knots.<\/p>\n
Later we tinkered with raising and lowering the centre-board and it makes a difference of 0.3 to 0.4 knots.<\/p>\n
Because the well is open at the bottom, the water sloshes around, and when under lots of power it boils around in there, absorbing quite a lot of power.\u00a0 So there’s even more scope for better speed after I make a blocking wing to seal the hole.<\/p>\n
And that’s the main reason she’s now out of the water on the trolly (again!).\u00a0 It’ll take quite a few days to figure out and build suitable wings or flaps to block the hole when the motor is up, and down.\u00a0 But it also gives me a chance to complete the repairs from the flood damage. Even on sunny days there’s a heavy dew till late morning, and this dampness has made it difficult to properly dry out the balsa core before doing\u00a0 the repairs.\u00a0 On the hard it will be easier to set up heater fans to get it properly dry.<\/p>\n
In the tests we tried the motor at different throttle settings and think we found a ‘sweet spot’ for this boat – at around 1500 watts she lopes along at around 4.5 knots. This is a nice speed, and the batteries have enough to energy to do this for 5 or 6 hours.<\/p>\n
These figures confirm that this motor is about twice as efficient as the Epod.\u00a0 That is, at a particular speed I would get twice the range with the Torqeedo.\u00a0 Or looking at it another way, switching to the Torqeedo is equivalent to adding another bank of batteries.\u00a0 And at ten thousand dollars a bank, its a good investment huh.<\/p>\n
The motor we tested a few days ago was off Claude’s boat, and the one I have now is new, out of the box.\u00a0 And its seems there’s slight differences in settings of the controller – because with this controller we saw much better power astern. This controller showed up to 3000 watts of power, so I’m pleased with that.<\/p>\n
Claude suggests there’s more to it, because the controller is clever enough to sense when there is cavitation of the prop and it automatically reduces power to allow the prop to grip.\u00a0 And thats the effect we saw the other day with the lower readings. Understanding that better will have to wait until I’m back in the water.<\/p>\n","protected":false},"excerpt":{"rendered":"
I ordered the Torqeedo on Tuesday, and Claude delivered it on Wednesday. And we installed it and it worked perfectly first time. What a breath of fresh to have things work as they should. She was to be slipped at 4pm and so Claude brought the motor here early enough so we could go up … <\/p>\n